(+1) 905 597 5955
This 9 inch flush mount ceiling light carries five colour temperatures and three wattages on two switches behind the housing, so one part number covers a bathroom, a hallway or a closet.
Set 12W, 15W or 18W. Tested output reaches 1,520 lm at 4000K, CRI sits above 90, and the housing is only 0.65 inches deep.
cETLus listed for damp locations, IP44, 2.5kV surge protection built in, 50,000 hours rated, 5 year warranty.
What size flush mount light suits a bathroom?
A 9 inch head is the usual pick for a bathroom, powder room, hallway or closet. This one measures 9 inches across and sits 0.65 inches off the ceiling, and the 120° beam spreads across a small room instead of dropping a hot spot over the vanity. It's cETLus listed for damp locations, the rating a Canadian bathroom ceiling needs outside the shower enclosure.
Is 3,000 lumens bright enough for a bathroom?
For a room this size that's more than you need. Independent photometry (EVERFINE GO-2000B, tested 2025-12-01) measures 1,367 lm at 2700K and 1,602 lm at 3500K on the 18W step, and the 12W step runs 987 to 1,108 lm. Warm settings cost light. At the same wattage you give up around 235 lm moving from 3500K to 2700K. Plan the vanity as its own layer, because no ceiling fixture lights a face on its own.
Why five colour temperatures and three wattages in one fixture?
It cuts what sits on your shelf. One box covers 2700K through 5000K and 12W, 15W or 18W, so you hold one part number instead of fifteen. Both switches sit on a pigtail at the back, set before the fixture goes up. Warm for residential, 4000K for a commercial washroom.
What fits, and what won't
Leave a clear ceiling area of Ø9" x 0.65". It mounts to a standard outlet box using the supplied plate and two screws, and it'll run horizontal or vertical. Damp location covers a bathroom ceiling, a covered porch or a laundry room, not inside a shower enclosure or anywhere taking direct spray. Dimming is Triac only, so pair it with a forward phase dimmer. Rated -20°C to 40°C, which rules out an unheated garage through a Prairie winter.
For the mounting sequence, the wire nut and Quick Connector options and the package list, open the Manual (PDF) in the Related documents panel, and pull the IES set if your designer needs per wattage, per CCT photometry. Send us your unit count and the white and black split, and we'll come back with a wholesale quote.
