Filters

Applied filters Clear all

Subcategories

Brightness

CCT

Power

LED Wrap Light

Q: Can LED wrap lights replace fluorescent wraparounds directly?

Yes, in most cases it's a one-for-one swap. An integrated LED wraparound mounts on the same ceiling footprint and wires to the same line voltage, so you skip the ballast and the tube-by-tube retrofit. Our 4ft models take AC120-347V, which covers standard and higher commercial circuits. Remove the old fixture, mount the LED unit, connect the supply.

Q: Can you directly replace fluorescent tubes with LED?

You can, but a full fixture swap is usually the better call. Tube-only retrofits still rely on the old housing and may need the ballast bypassed. Replacing the whole fluorescent wrap with an integrated LED wraparound removes the ballast, gives you a sealed LED board, and resets the rated life. For commercial buildings, the fixture swap is cleaner and lasts longer.

Q: Are LED wrap lights dimmable?

Our 4ft wrap lights are power-adjustable across five output levels (25W to 50W) and selectable across five colour temperatures (3000K to 6000K), set right on the fixture. For 0-10V control tied to a wall dimmer or building system, ask us to confirm the dimming spec on the model you're quoting before you order.

Q: What colour temperature should you pick for LED wrap lights?

For offices and schools, 4000K reads clean and neutral. For garages, workshops, and utility rooms, 5000K gives a brighter, crisper light. Hallways usually suit 3500K to 4000K. Our 5-CCT models let you set anywhere from 3000K warm to 6000K cool on the same fixture, so you can standardise stock and decide on site.

Q: How many LED wrap fixtures do you need?

It depends on room size, ceiling height, and target light level. As a rough start, a 4ft wrap covers roughly a 4ft by 8ft to 10ft zone for general commercial lighting, but the right count depends on lumens and layout. Send us the room dimensions and use, and we'll return a fixture count and spacing plan with your quote.

Q: What is the downside of LED wrap lights?

The main trade-off is the higher up-front fixture cost versus a basic fluorescent wrap, though energy and maintenance savings usually pay that back inside a couple of years. Integrated LED units also replace as a whole fixture rather than a tube. Pick a CSA-certified model with a known driver and a real warranty to avoid the early-failure issues cheap imports have.

2 products

sort:

4ft Linkable Wrap Light – 5WAY CCT & Power Adjustable

Power: 50W/ 45W/ 40W/ 30W/25W ADJ
CCT: 3000K/ 3500K/ 4000K/ 5000K/ 6000K Adj
Input Voltage: AC120-347V

View Product

4ft Linkable Wrap Light – 5WAY CCT & Power Adjustable - Sensor

Power: 50W/ 45W/ 40W/ 30W/25W ADJ
CCT: 3000K/ 3500K/ 4000K/ 5000K/ 6000K Adj
Input Voltage: AC120-347V

View Product

Votatec supplies commercial LED wrap lights for offices, hallways, garages, and utility rooms across Canada. The wraparound lens spreads light evenly with no hot spots, and our 4ft linkable models run 5-CCT selectable (3000K to 6000K) and power-adjustable (25W to 50W) on AC120-347V. One SKU covers several light levels and colour temperatures. Built for contractors, CSA certified, quotes inside 24 hours.

CSA certified
5-CCT selectable, 3000K-6000K
Power-adjustable, 25-50W
Linkable, AC120-347V
Quote in 24 hours

Get a bulk quote
Ask a spec question

What Is a Wrap Light Fixture?

A wrap light is a surface-mount linear fixture with a curved lens that wraps around the light source, so the glow spreads to the sides and down instead of pointing straight at the floor. That soft, even spread is why wrap lights suit offices, schools, and corridors. An LED wrap light does the same job as the old fluorescent wraparound, with lower energy use, no flicker, and a much longer life. Most mount flush to the ceiling and link end to end for continuous runs.

LED Wraparound vs Fluorescent Wrap: A Direct Swap?

Mostly, yes. An integrated LED wraparound replaces a fluorescent wrap fixture on the same ceiling footprint and the same supply, so you skip the rewiring a tube-by-tube retrofit needs. You take out the old fixture, mount the LED unit, and wire it to line voltage. Our 4ft models accept AC120-347V, so the same SKU works on both standard and higher commercial circuits. There's no ballast to fail, and the sealed LED boards mean no tube swaps down the line. For a building full of aging fluorescent wraps, the LED wraparound is the clean one-for-one upgrade.

Where Do You Use LED Wrap Lights?

LED Wrap Lights for Offices and Commercial Spaces

The wraparound lens cuts glare on screens and spreads light evenly across desks. 4000K to 5000K keeps an office bright and neutral. Linkable runs cover open-plan floors with a clean ceiling line.

Wraparound Lights for Hallways and Corridors

Long corridors need steady, even light end to end. Link the 4ft fixtures into continuous rows and set a single CCT across the run so the hallway reads uniform with no dark gaps.

LED Wrap Fixtures for Garages and Utility Rooms

Bright, durable, and easy to mount on a low ceiling. The power-adjustable setting lets you dial output up for a workshop or down for a storage room, all from one fixture.

Wrap Around Lights for Schools and Institutions

Classrooms, libraries, and care facilities need quiet, flicker-free light. The diffused wraparound lens is easy on the eyes through a long day, and the long rated life cuts maintenance trips in hard-to-schedule buildings.

What Size LED Wrap Light Do You Need?

4ft LED Wrap Light Fixtures

The standard size and our stocked range. A 4ft linkable wrap covers the most common office, hallway, and garage layouts, and links into continuous runs for larger rooms. Both our SKUs are 4ft: the 4ft linkable wrap light with 5-CCT and power-adjustable output, and the 4ft model with built-in occupancy sensor for low-traffic rooms.

2ft and 8ft Wrap Lights on Request

Need a 2ft wrap for a small room or an 8ft run for a long aisle? We can source other lengths by quote for project orders. Send us your room sizes and we'll spec the right fixture count and length.

Why Contractors Choose Votatec for Wrap Lights

Bulk pricing built for the trade. Quote-based, volume-friendly, no retail markup.
CSA certified for Canadian electrical code compliance.
One adjustable SKU, many jobs. 5-CCT and power-adjustable cuts what you stock.
Linkable, AC120-347V so the same fixture fits standard and commercial circuits.
Quotes in 24 hours so your bid doesn't wait on a supplier.
Ships Canada-wide from a Canadian supplier, GTA to coast.

The Numbers: LED Wrap vs Fluorescent

Switching a fluorescent wrap to LED cuts energy and maintenance at the same time. The US Department of Energy reports LEDs use at least 75% less energy and last up to 25 times longer than incandescent lighting.^[1] Against fluorescent strip and wrap fixtures, an integrated LED wraparound commonly trims energy use by 30% to 50% before controls.^[2] Add power-adjustable output and an occupancy sensor, and the runtime saving grows.

The other win is upkeep. A long-rated LED life means no ballast failures and no tube changes, which matters most in ceilings that are awkward or costly to reach.^[3]

Get a Wrap Light Quote

Send your room type, ceiling height, and fixture count. We'll spec the right 4ft wrap light and return bulk pricing inside 24 hours. Start your quote or browse all LED fixtures.

Frequently Asked Question

What is a wrap light and how does it differ?

Can LED wrap lights replace fluorescent wraparounds directly?

Can you directly replace fluorescent tubes with LED?

Are LED wrap lights dimmable?

What colour temperature should you pick for LED wrap lights?

How many LED wrap fixtures do you need?

What is the downside of LED wrap lights?

Filter

filters