(+1) 905 597 5955
The 4ft Architectural Linear runs off one dip switch. Set 30W, 40W or 50W, pick 3000K, 3500K, 4000K or 5000K, and a single part number covers twelve configurations on site.
Tested output runs 3,772 to 6,434 lumens at 130 to 133 lm/W, CRI above 80, on any supply from 120V to 347V.
Aluminum housing in white or black. 0-10V dimming, cULus Listed for damp locations, 5-year warranty.
One SKU, twelve configurations
The dip switch sits on the end cap and sets wattage and colour temperature separately. Efficacy holds between 130 and 133 lm/W across all twelve combinations, so dropping to the 30W step costs you brightness, not efficiency. The 120V to 347V input covers a retail unit on a residential feed and a 347V commercial building.
What is the lifespan of a LED linear light?
Votatec rates this fixture at 50,000 hours. That's the L70 point, where the LEDs still deliver 70% of their original output, not the point where they stop working. At 12 hours a day, 50,000 hours is about 11 years. The 5-year warranty covers the driver and the LED module.
Direct light, or direct and indirect?
Out of the box the fixture throws light down through a PC diffuser. Add the upper module and it puts a second layer onto the ceiling, which softens the contrast people notice in open offices. The module is a separate order code per length and finish, so you can mix both on one run.
How long a run can you link?
Sixteen 4ft units join into a single 64ft line. A buckle joint handles straight runs, and L, T, X, V and Y connectors turn the line into rectangles, tees, crosses, hexagons and Y shapes. Every fixture ships with a 10ft five-core 600V cord.
Mounting, wiring and sensors
Suspension needs two 6mm holes 800mm apart. Surface mounting takes four 6mm holes drilled in pairs at 32mm spacing. Wall and recessed kits order separately. At the terminal block, live is black, neutral white, ground green, DIM+ purple and DIM- pink. IP20, damp rated, and it holds from -20C to 40C. One HSE-SP21L-2 PIR controls up to ten 2ft or 4ft units, with a 10-second warm-up where the fixture flickers before settling.
For hole spacing, wiring colours and the connector sequence, open the AR Linear user manual in, and pull the IES set if your designer needs per-CCT photometry for a layout. Send us your run lengths and fixture count and we'll come back with a wholesale quote and a voltage check for the site.
