(+1) 905 597 5955
The VO-24W50-347-5Way-B-PX is a 2x4 back-lit LED panel that sets both wattage and colour temperature on the fixture itself, so one part number covers five specs on a drawing.
Five power steps, 30W to 50W. Five colour temperatures, 3000K to 6000K. Up to 6,150 lumens at 50W, CRI 80+, 0-10V dimming to 10%.
Aluminum frame, PMMA lens, no light guide plate to yellow. cETLus listed, five-year warranty.
What is the wattage of a 2x4 LED flat panel light?
This one runs 30W, 35W, 40W, 45W or 50W, and you pick the step on the fixture. Slide the wattage switch, slide the CCT switch, done. No separate driver to order and no second SKU to stock.
It leaves the factory set to 50W and 3500K. Check that before you hang a full floor, because the default is the top of the range. At 50W it measures 6,150 lumens. Drop to 30W and it still clears 3,500.
How long do 2x4 LED lights last?
The spec sheet rates this panel at 50,000 hours, and Votatec backs it with a five-year warranty. The LED board isn't a replaceable lamp. When it reaches end of life the whole luminaire gets swapped, so budget maintenance on fixture count rather than lamp count.
Will it fit a T-bar grid or a hard ceiling?
Both. It drops straight into a 2x4 T-bar grid with no frame at all. For drywall, concrete or a surface mount job, order the surface mounted frame (SF24-A), the recessed kit, the suspended kit or spring clips separately.
The junction box carries five knockouts sized for 90 degree conduit, which keeps enough clearance at the deck on a tight plenum. Indoor installation only.
What dimmer works with it?
0-10V, down to 10%. Votatec has tested the Lutron DSTV-Diva against it. Older dimmers built for incandescent loads cause erratic operation, and some dimmers need more than one fixture on the circuit before they hold steady.
The driver takes anything from 120V to 347V. That's why the same part number works in a Toronto office ceiling and on a 347V service, without a transformer and without a second line item.
For the field adjustment steps, the tested dimmer list and the frame accessory codes, open the Manual (PDF)l, and pull the IES files if your designer needs photometrics for a layout. Send us your fixture count and ceiling type and we'll come back with a wholesale quote.
