type at least 3 characters
type at least 3 characters

ST14 Filament LED – Milky

  • Model No.: VO-FS14W5.5-26-30-D-M
  • Power : 5.5W
  • CCT : 3000K
  • Base : E26
More Details
ST14 Filament LED – Milky

Other product from this category

Product Details

A milky-glass ST14 LED filament bulb that spreads the filament into an even glow, so an exposed pendant doesn't glare at eye level the way clear glass does. It draws 5.5W for 600 lumens at 3000K, with CRI above 80, a 360° beam and a standard E26 base. Dimmable on common Leviton and Lutron controls. Glass body, ETL listed by Intertek, backed 3 years.

What's the difference between an ST14 and an S14 bulb?

Physically, almost nothing. Both codes describe a bulb 14 eighths of an inch across, about 1.75 in, and both use an E26 medium base here. The letters describe the profile only: S is straight sided, ST is straight tubular, so an ST14 drops into a socket built for S14. Suppliers use the two codes interchangeably, and marketplaces mix them in the same search results. Check the diameter and the base before you order, not the letters.

Can you use this bulb in outdoor string lights?

No. It's rated IP20, which covers dry indoor locations only, and the spec sheet lists it as not rated for enclosed fixtures. That's worth saying plainly, because the ST14 and S14 shape is mostly sold for bistro and patio strings, and those runs sit in damp or wet locations. Specify a wet-rated lamp for anything outside. Keep this one for interior pendants, open sconces and café fixtures under a roof. The spec table gives an operating range of -25°C to 40°C.

Why milky glass instead of clear

Clear filament glass shows you the filament. That's the look people buy, and it's also a small, very bright source that glares when the bulb sits near eye level, over a counter, in a stairwell or under a low pendant. The milky coating spreads the same output across the whole envelope. You keep the vintage shape and the warm 3000K tone, and you lose the hotspot. Votatec builds the clear version to the same 5.5W spec when the exposed filament is the point.

Dimming, power and warranty

It dims, on a tested list: Leviton 6681, 6674 and 6683, plus Lutron DVCL-153PLH, S600-P, DV600-P15 and MACL-153M. Stay on that list. The bulb runs at 120V, 50-60Hz, carries 2.5kV surge protection as standard, is ETL listed by Intertek and is rated for 15,000 hours with a 3-year warranty.

For the full dimmer list, the surge rating and the 45mm by 80mm envelope, open the Spec sheet (PDF) in the Related documents panel. Send us your socket count and whether the fixtures are open or enclosed, and we'll come back with a wholesale quote and a dimmer compatibility check.

Relateddocuments

Features

https://votatec.ca/wp-content/uploads/2025/04/Icon_107107-100.png
https://votatec.ca/wp-content/uploads/2024/04/ELT_Icon_135_135-1-1.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-01-52.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-10.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-05.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-11.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-68.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-09.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-08.png
https://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-07.png

Product Specification

  • Model No.: VO-FS14W5.5-26-30-D-M
  • Power:5.5W
  • Input Voltage:120V
  • Power Factor:0.9
  • Brightness:600Lm
  • CCT:3000K
  • Beam Angle:360°
  • Base:E26
  • Dimension:1-6/8" x 3-1/4"
  • Compatible Dimmers:Leviton: 6681、6674、6683/ Lutron: DVCL-153PLH、S600-P、DV600-P15、MACL-153M
  • Shape:ST14
  • Suitable for Enclosed Fixtures:No
ST14 Filament LED – Milky
Link copied!

ST14 Filament LED – Milky

  • Model No.: VO-FS14W5.5-26-30-D-M
  • Power : 5.5W
  • CCT : 3000K
  • Base : E26
More Details

Other product from this category

Product Details

A milky-glass ST14 LED filament bulb that spreads the filament into an even glow, so an exposed pendant doesn't glare at eye level the way clear glass does. It draws 5.5W for 600 lumens at 3000K, with CRI above 80, a 360° beam and a standard E26 base. Dimmable on common Leviton and Lutron controls. Glass body, ETL listed by Intertek, backed 3 years.

What's the difference between an ST14 and an S14 bulb?

Physically, almost nothing. Both codes describe a bulb 14 eighths of an inch across, about 1.75 in, and both use an E26 medium base here. The letters describe the profile only: S is straight sided, ST is straight tubular, so an ST14 drops into a socket built for S14. Suppliers use the two codes interchangeably, and marketplaces mix them in the same search results. Check the diameter and the base before you order, not the letters.

Can you use this bulb in outdoor string lights?

No. It's rated IP20, which covers dry indoor locations only, and the spec sheet lists it as not rated for enclosed fixtures. That's worth saying plainly, because the ST14 and S14 shape is mostly sold for bistro and patio strings, and those runs sit in damp or wet locations. Specify a wet-rated lamp for anything outside. Keep this one for interior pendants, open sconces and café fixtures under a roof. The spec table gives an operating range of -25°C to 40°C.

Why milky glass instead of clear

Clear filament glass shows you the filament. That's the look people buy, and it's also a small, very bright source that glares when the bulb sits near eye level, over a counter, in a stairwell or under a low pendant. The milky coating spreads the same output across the whole envelope. You keep the vintage shape and the warm 3000K tone, and you lose the hotspot. Votatec builds the clear version to the same 5.5W spec when the exposed filament is the point.

Dimming, power and warranty

It dims, on a tested list: Leviton 6681, 6674 and 6683, plus Lutron DVCL-153PLH, S600-P, DV600-P15 and MACL-153M. Stay on that list. The bulb runs at 120V, 50-60Hz, carries 2.5kV surge protection as standard, is ETL listed by Intertek and is rated for 15,000 hours with a 3-year warranty.

For the full dimmer list, the surge rating and the 45mm by 80mm envelope, open the Spec sheet (PDF) in the Related documents panel. Send us your socket count and whether the fixtures are open or enclosed, and we'll come back with a wholesale quote and a dimmer compatibility check.

Show more

Product Features

  • Model No.: VO-FS14W5.5-26-30-D-M
  • Power:5.5W
  • Input Voltage:120V
  • Power Factor:0.9
  • Brightness:600Lm
  • CCT:3000K
  • Beam Angle:360°
  • Base:E26
  • Dimension:1-6/8" x 3-1/4"
  • Compatible Dimmers:Leviton: 6681、6674、6683, Lutron: DVCL-153PLH、S600-P、DV600-P15、MACL-153M
  • Shape:ST14
  • Suitable for Enclosed Fixtures:No

Related documents

Product Certificates

https://votatec.ca/wp-content/uploads/2025/04/Icon_107107-100.pnghttps://votatec.ca/wp-content/uploads/2024/04/ELT_Icon_135_135-1-1.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-01-52.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-10.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-05.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-11.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-68.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-09.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-08.pnghttps://votatec.ca/wp-content/uploads/2024/04/Icon_107_107-07.png

Categories:

LED Lamps MR16

Tags:

LED MR16 Votatec

Contact Us

For questions about VOTATEC and your VOTATEC products, we’re ready to help

Another form image

"*" indicates required fields

Similar Products

G16.5 Filament LED

G16.5 Filament LED

  • Power: 5.5W

  • CCT: 3000K

  • Base: E12

A19 White Filament LED

A19 White Filament LED

  • Power: 7W

  • CCT: 3000K/ 4000K/ 5000K

  • Base: E26

ST64 White Filament LED

ST64 White Filament LED

  • Power: 6.5W

  • CCT: 3000K/ 4000K/ 5000K

  • Base: E26

Candle White Filament LED - 5.5W

Candle White Filament LED - 5.5W

  • Power: 5.5W

  • CCT: 3000K/ 4000K/ 5000K

  • Base: E12

Candle White Filament LED - 3.8W

Candle White Filament LED - 3.8W

  • Power: 3.8W

  • CCT: 3000K/ 4000K/ 5000K

  • Base: E12

T45 Filament LED

T45 Filament LED

  • Power: 7W

  • CCT: 3000K/ 4000K/ 5000K

  • Base: E26

G25 Filament LED - Milky

G25 Filament LED - Milky

  • Power: 9W

  • CCT: 3000K

  • Base: E26

dragleft
dragright
NEW
Products