The VO-SC2W24 is a hardwired 120V dual-head motion security light with five colour temperatures you select on the fixture. Its PIR sensor sweeps 180 degrees and reaches 52.49 ft (16 m).
Two 12W heads draw 24W for 2200 lm at CRI above 80, each throwing a 100 degree beam. Choose 2700K, 3000K, 3500K, 4000K or 5000K.
ETL Listed for wet locations, IP65, rated to -30°C. 35,000 hours, 3-year warranty.
What are the downsides of using motion sensor lights?
False triggers, mostly. A sensor that fires at every passing raccoon burns goodwill and runtime. This unit answers that with three sensitivity stages and a built-in photocell that holds the heads off until ambient light falls below 50 lux, then switches them out again above 150 lux. Two placement rules from the manual matter more than any setting: keep the fixture at least 3 m clear of anything lit by metal halide, and expect small animals inside the detection zone to trip it. If it cycles in daylight after install, drop the sensitivity one stage.
How far does the PIR sensor actually reach?
52.49 ft (16 m) across 180 degrees, measured at the recommended 8.2 ft mounting height with the sensor tilted to 45 degrees. Mount it higher or lower and coverage, distance and sensitivity all shift together. Hold time steps through 5 seconds for testing, then 1, 5 and 15 minutes. An ON position keeps both heads lit constantly so a wall switch takes over.
Five colour temperatures, one part number
2700K, 3000K, 3500K, 4000K and 5000K select on the fixture itself. One SKU covers a warm residential entry and a 5000K loading dock, which means five CCTs of coverage against a single line of stock. Both heads pivot 45 degrees horizontally and 270 degrees vertically, and the sensor head adjusts on its own axis.
What it won't do
It isn't dimmable. The manual rules out dimmers and timers, so don't spec it into a 0-10V circuit. It's wire-connect only into a wall junction box, wall or eave mounted. Fit the waterproof gasket and seal the box, or the IP65 and wet-location rating won't hold. Operating range is -30°C to 40°C.
For the wiring sequence, gasket placement and the sensitivity and hold-time settings, open the Manual (PDF). Send us your quantity and the split between white and black housings, and we'll come back with a wholesale quote and current stock on both.
























