LED Corn Light – Power Adjustable – 36W-CLW08G
- Model No.: AST-CLW08G-036WBCA1
- Power : 36W/ 27W/18W ADJ
- CCT : 4000K/ 5000K
- Base : E26/E39
Product Details
Relateddocuments
Features
Product Specification
- Model No.: AST-CLW08G-036WBCA1
- Power: 36W/ 27W/18W ADJ
- Input Voltage:AC120-347V
- Power Factor:>0.9
- Brightness:5040-5580 LM
- CCT:4000K/ 5000K
- Beam Angle:360°
- Base:E26/E39
- Dimension:Φ3.35" x 7.56"
- IP Rating:IP64
LED Corn Light – Power Adjustable – 36W-CLW08G
- Model No.: AST-CLW08G-036WBCA1
- Power : 36W/ 27W/18W ADJ
- CCT : 4000K/ 5000K
- Base : E26/E39
Product Details
Do you have to remove the ballast first?
Yes. Bypass the ballast before this lamp goes in. Votatec's instruction book is blunt about why: leave the ballast in circuit and it "will produce the resonance of high voltage and makes led corn light breakdown." You'll kill the lamp on startup. Cut the ballast out, wire line and neutral straight to the socket, then fit the lamp. Only a qualified electrician should do this, and the fixture's input rating has to be at least the lamp's. If a security rope came in the box, clip it to the lamp and anchor the other end to the fixture shell before you power up.What metal halide wattage does it replace?
Each step maps to an HID load. 36W replaces a 100W HID lamp, 27W replaces 80W, and 18W replaces 50W, per the Votatec datasheet. You get 145lm/W at 4000K and 150lm/W at 5000K, so the lamp holds its efficiency at every setting rather than only at full output.Why buy a wattage-selectable lamp?
Because you spec once and tune on site. Order one part number, then set each lamp to suit the mounting height and the fixture it lands in. Rows that came out too bright drop a step without a return. For a distributor it also means one bin instead of three.Will it fit the fixture you already have?
Check the compartment before you order. This lamp needs a minimum lamp compartment of 14.96in long by 7.87in wide by 7.87in high, and the lamp itself measures 3.35in across by 7.56in. It's rated for enclosed fixtures, runs horizontal or vertical, and holds up from -40C to 50C, so Canadian winters aren't a problem. Damp location only, and never in an emergency exit fixture. Post top, garden light, shoebox and highbay housings are the intended homes. For the ballast bypass sequence, the wiring diagrams and the full safety warnings, open the Manual (PDF) in the Related documents panel, and pull the IES file if your designer needs photometry for a layout. Send us your fixture count and mounting heights and we'll come back with a wholesale quote and a compartment-fit check.Show more
Product Features
- Model No.: AST-CLW08G-036WBCA1
- Power:18W ADJ, 27W, 36W
- Input Voltage:AC120-347V
- Power Factor:>0.9
- Brightness:5040-5580 LM
- CCT:4000K, 5000K
- Beam Angle:360°
- Base:E26/E39
- Dimension:Φ3.35" x 7.56"
- IP Rating:IP64
Related documents
Product Certificates

Categories:
Tags:
Contact Us
For questions about VOTATEC and your VOTATEC products, we’re ready to help
"*" indicates required fields



























