The Adjustable Wall Pack Light 80W is a bronze die-cast exterior wall pack whose head tilts through a 0-90° arc, so you can aim the light at the ground instead of across the property line.
Choose 65W, 70W or 80W, and 3000K, 4000K or 5000K, on two switches inside the driver box. Output runs 7,800Lm to 10,800Lm depending on the pair you pick.
IP65, wet-location cULus listed, 120-347V, built-in photocell, 5-year warranty.
What is an adjustable LED wall pack?
It's an exterior wall-mounted fixture whose optical head rotates on a hinge, so you set the aiming angle after it's bolted up. On this one the range is 0-90°, released with an Allen wrench on the two radiator screws. A fixed wall pack throws light forward at whatever angle the housing was cast at, and that's the whole difference. Tilting the head down puts more of the output on the pavement you're trying to light and less of it into a neighbour's window.
How long do LED wall packs last?
The spec sheet rates this fixture at 50,000 hours. Left on the built-in photocell it runs roughly half of every year, near enough 4,380 hours, which works out to about 11 years before the LEDs reach end of rated life. The warranty runs 5 years. Ask us for the current figure before you quote a long-life claim, because Votatec's two documents don't agree on it.
Why three wattages in one fixture?
Selectable output cuts what you have to stock. One catalogue number covers a rear entry, a loading dock and a parking wall, so a distributor holds one box instead of three. There's a catch worth knowing at quoting time. Both switches sit inside the driver box, which means they're set during the install, not adjusted from a ladder six months later.
What should the electrician know before wiring?
Supply conductors have to be rated 90°C minimum. That's on the fixture label, so rough in the right wire before it ships. The manual adds one restriction that catches rebate jobs: fixtures on a DLC-listed installation must all face the same direction, not scatter across different tilt angles. Don't mount in the rain, and put a licensed electrician on it.
For the 9-step mounting sequence, the switch positions and the bilingual warning label, open the Manual (PDF), and pull the IES file if your designer needs the 3000K photometry. Send us your fixture count and mounting heights, and we'll come back with a wholesale quote and a check on DLC status for your rebate paperwork.





























