(+1) 905 597 5955
This LED wall pack lets the installer set the beam angle on site, not the factory. One fixture covers three optical distributions, four wattages and three colour temperatures.
Slide the selectors to pick 60W, 80W, 100W or 120W, and 9,136 to 18,176 lumens measured. Built-in photocell. AC120-347V on one driver.
Die-cast aluminium housing, glass lens, IK08 impact rating, IP65, wet location listed, built-in 6kV surge protection, CRI above 80, 5 year warranty.
How long do LED wall packs last?
Rated 50,000 hours to L70, which means it still delivers 70% of its original output at hour 50,000. On a dusk to dawn photocell that's roughly 12 hours a night, so about 11 years before it reaches that mark. The driver carries a -40C to 45C ambient rating, so it holds through a Prairie winter and a July loading dock.
Semi-cutoff or full cutoff, which do you need?
This is a semi-cutoff fixture, per its installation manual. Semi-cutoff pushes light outward and slightly up the wall, so it washes the building face and reaches further across a lot. Full cutoff sends everything straight down, which is what a bylaw restricting uplight or light trespass will ask for. If your spec calls for full cutoff, use the Full Cut-Off 120W instead.
Which wattage should you run?
80W is the efficiency sweet spot. It measures up to 165 lm/W, ahead of the 100W step at 148 lm/W, because output doesn't scale evenly across the selector. Measured output runs 9,136-9,583 lm at 60W, 12,354-13,216 lm at 80W, 14,088-14,813 lm at 100W and 17,091-18,176 lm at 120W, depending which colour temperature you set.
For the switch positions, the wiring colours and the drain plug step, open the Manual (PDF), and pull the IES file if your designer needs photometry for all three optics. Send us your fixture count and mounting heights and we'll come back with a wholesale quote and a DLC listing check for your rebate paperwork.
